Header Ads Widget

Ticker

6/recent/ticker-posts

water chillers trane Oil Separator

water chillers trane 
Oil Separator
Oil Separator


Oil Separator:
The oil leaves the compressor entrained within the discharged refrigerant vapor 
The oil is recovered from the discharged refrigerant by an oil separator, which can have an efficiency of greater than 99%. The separator consists of a vertical cylinder surrounding an exit passageway. As the refrigerant-and-oil mixture is discharged into this passageway the oil is forced outward by centrifugal force  collects on the walls of the cylinder, and drains to the bottom. This accumulated oil drains out of the cylinder and collects in the oil sump located near the  bottom of the chiller The oil sump is heated to ensure proper lubrication and minimize refrigerant condensation in the sump




<
Oil that collects in the oil sump is at condensing pressure during compressor operation and is, therefore, constantly moving to lower pressure areas of the chiller. In this system, oil flows in 2 distinct paths, each performing a separate function: 1) bearing lubrication and cooling and 2) rotor oil injection Oil leaves the sump and passes through an oil filter and master solenoid valve  The master solenoid valve is used to isolate the sump from the low-pressure side of the system when the compressor is shut down, preventing oil migration The first path is for lubricating and cooling the compressor bearings Œ. Oil is routed to the bearings located in the rotor and bearing housing. Each housing is  vented to the suction side of the compressor so that oil leaving the bearings is routed through the rotors, to the oil separator, and then back to the oil sump The second path is for lubricating and sealing the compressor rotors . Oil is injected along the bottom or top of the compressor rotors inside the housing . Its main purpose is to seal the rotor-to-rotor and rotor-to-housing clearances This seal provides a barrier between the high- and low-pressure cavities of the compressor. Additionally, oil lubricates the male-to-female rotor drive arrangement


 
You can find in the blog of air-conditioning all the news and information in the field of cold and climatisaion in club chiller control


https://www.masabihaddoja.com/

airconditioner-auto

http://adf.ly/1OJam9

clubclimfroid.blogspot

http://adf.ly/1OJazt

clubchillercontrol.blogspot

http://adf.ly/1OJb4w

youtubeclimafroid.blogspot

http://adf.ly/1OJbKo

youtube.com/user/abobahaaeddine

http://adf.ly/1OJbQM



abo bahaaeddine
          


Post a Comment

4 Comments

  1. Nice description of the process. Thanks for sharing.

    ReplyDelete
  2. Thanks for the auspicious writeup. It in fact was once a enjoyment
    account it. Look advanced to more introduced
    agreeable from you! By the way, how could we communicate?

    ReplyDelete
  3. Wheen someone writes an piece of writing he/she
    keeps thhe plan of a user in his/her brain that how a user ccan be aware of it.
    Thus that's why this piece of writing is great. Thanks!

    ReplyDelete